Tweet
1.How to update s/w by PC?
======================
1) Prepare a twisted RS232C cable(pin-2 to pin-3,pin-3 to pin-2,pin-5 to pin-5).
2) Connect your PC and receiver with twisted RS-232C cable.
3)press "POWER" *** to make it standby,
the LED dot will blink.
4) Run the update tool on your PC,Slect the <Download Main S/W>,
press <Open> and select the bin file,then click <Start>,upgrade will begin.
5) After finishing, the LED will display "-End"
yazılımlar : http://www.tr321.com/======================
1) Prepare a twisted RS232C cable(pin-2 to pin-3,pin-3 to pin-2,pin-5 to pin-5).
2) Connect your PC and receiver with twisted RS-232C cable.
3)press "POWER" *** to make it standby,
the LED dot will blink.
4) Run the update tool on your PC,Slect the <Download Main S/W>,
press <Open> and select the bin file,then click <Start>,upgrade will begin.
5) After finishing, the LED will display "-End"
.Hot ***s
================================
a) F1 + 000: Patch Enable/Disable
b) F1 + 111: Rs232 Mode list
c) F1 + 555: Ethernet IP Setting (Only when Ethernet CSC selected)
d) F1 + 666: Ethernet Server Setting (Only when Ethernet CSC selected) e ) F1 + 777 Auto IP
================================
a) F1 + 000: Patch Enable/Disable
b) F1 + 111: Rs232 Mode list
c) F1 + 555: Ethernet IP Setting (Only when Ethernet CSC selected)
d) F1 + 666: Ethernet Server Setting (Only when Ethernet CSC selected) e ) F1 + 777 Auto IP