Tweet
ENIGMA 2 for all DGStation products:
- cuberevo-mini-fta (cuberevo-200hd)
- cuberevo-250hd (ipbox-91hd)
- cuberevo-mini (ipbox-900hd)
- cuberevo-mini2 (ipbox-910hd, cuberevo-3000hd, madtek-3000hd)
- cuberevo-2000hd
- cuberevo-9500hd (cuberevo-7000hd)
- cuberevo (ipbox-9000hd rel1 and rel2)
First boot take a little bit much more than a normal boot, so wait until you can see the bandeau bar (the one with infos on current channel) on the tv screen.
---------
HISTORY:
---------
release 0.4.1:
*********************
- fixed a bug on setting ip and dhcp on particular cases where dhcp server is off
release 0.4.0:
*********************
- fixed boot image that was not shown every time on every TV
- revert back to python 2.5, now you can use all enigma2 plugins for dreambox receivers wich do not have sources available and wich uses only python files
- fixed DHCP, now is working by network menu configuration
- added the option to enable DHCP also with nfs-server to load enigma2 (just change the kernel loading bootargs)
- fixed the overheading bug on date/time that caused to have always a wrong time/date
- fixed tuxtxt crashes and outputs management
- fixed the bug that causes Timezones outside of Europe not to work, always reverts back to GMT time. All times over 3+ GMT and under GMT did not work.
- spdif audio output on ipbox91hd/cuberevo250hd
- fixed subtitles on dreamtv-hd skin
- fixed aspect ratio: Pan&Scan and Pillar box settings reversed
- fixed menu selection options that were not selectable, like 8MHz bandwith selection, or many fec options
- fixed skin HD
- updated skin HD
- enabled ntfs as module
- patch for white subtitles (i don't know if this is usefull or not, but i thought it's better to have a
white subtitle with black background, just more viewable)
- fixed EPG button (now you can choose wich kind of epg list to view)
- fixed deep standby broken since 0.3.3 (do not forget to delete all wakeup timers from dgstation firmware, because if you forget it,
then the box will restart automatically!)
- added a Satellites configuration with all sat positions (if you think there's something missed you can still add yourself configuration files)
- added a Terrestrial configuration to support almost all Europe providers (inserted general europe voice,
obiously i can't add a provider for each one on the worl, so just update the file if you need a specific provider)
- fixed some other channels scan bugs
- fixed menu Network test on the "link connection" voice
- fixed positioner menu crashes
- MediaPlayer Bug with a gsod on NoneType error using subtitles
- fixed rotor using diseqc
- reboot of enigma2 now should works good
- completed the kernel version p0041 adaption
- improved a bit CI cams manager
- fixed many memory bugs that caused the player to crash (let me know if you find more bugs on playing multimedia files)
- ipkg support, as soon as sifteam will have a download for ipk files you will be able to download them from the browse plugin menu
- added by default the file /var/etc/rcS_user.sh that is called on boot, so if you want to add any kind of command to be executed on start
just put them in this file
- patch for North American satellites (let me know if you find any kind of bugs)
ATTENTION:
if you are a NA user, do not forget to change in the "/etc/init.d/rcS" file this value:
insmod $MODDIR/stmfb.ko display0=1280x720-32@50:12M:PAL:YUV:RGB;
into:
insmod $MODDIR/stmfb.ko display0=1280x720-32@60:12M:NTSC:YUV:RGB;
This is needed to let you see the boot image and to have a full working display on TV.
Ok that's all, i know there are some other bugs to be fixed, but i think there were a lot of improvement in this version and
i'm working to some new drivers so i think before using the new drivers we should test all these improvements and then see if something could be better or not.
İPBOX 9000 HD E2
tüm modeller için flash ve usb versiyonları buradan alabilirsiniz
auto ıp alıyor
HD skins çalışıyor
restart gui düzelmiş
ses/görüntü ayarlarından just scale seçip hafızaya alırsanız kanal değişince 16/9 olarak geliyor
incubusCamd 082 ile muntazam bir şekilde uyumlu çalışıyor
image için SifTeame PKT panel için PKT teşekkürler
E2 0.4.1 e uyumlu PKT paneli ekledim
- cuberevo-mini-fta (cuberevo-200hd)
- cuberevo-250hd (ipbox-91hd)
- cuberevo-mini (ipbox-900hd)
- cuberevo-mini2 (ipbox-910hd, cuberevo-3000hd, madtek-3000hd)
- cuberevo-2000hd
- cuberevo-9500hd (cuberevo-7000hd)
- cuberevo (ipbox-9000hd rel1 and rel2)
First boot take a little bit much more than a normal boot, so wait until you can see the bandeau bar (the one with infos on current channel) on the tv screen.
---------
HISTORY:
---------
release 0.4.1:
*********************
- fixed a bug on setting ip and dhcp on particular cases where dhcp server is off
release 0.4.0:
*********************
- fixed boot image that was not shown every time on every TV
- revert back to python 2.5, now you can use all enigma2 plugins for dreambox receivers wich do not have sources available and wich uses only python files
- fixed DHCP, now is working by network menu configuration
- added the option to enable DHCP also with nfs-server to load enigma2 (just change the kernel loading bootargs)
- fixed the overheading bug on date/time that caused to have always a wrong time/date
- fixed tuxtxt crashes and outputs management
- fixed the bug that causes Timezones outside of Europe not to work, always reverts back to GMT time. All times over 3+ GMT and under GMT did not work.
- spdif audio output on ipbox91hd/cuberevo250hd
- fixed subtitles on dreamtv-hd skin
- fixed aspect ratio: Pan&Scan and Pillar box settings reversed
- fixed menu selection options that were not selectable, like 8MHz bandwith selection, or many fec options
- fixed skin HD
- updated skin HD
- enabled ntfs as module
- patch for white subtitles (i don't know if this is usefull or not, but i thought it's better to have a
white subtitle with black background, just more viewable)
- fixed EPG button (now you can choose wich kind of epg list to view)
- fixed deep standby broken since 0.3.3 (do not forget to delete all wakeup timers from dgstation firmware, because if you forget it,
then the box will restart automatically!)
- added a Satellites configuration with all sat positions (if you think there's something missed you can still add yourself configuration files)
- added a Terrestrial configuration to support almost all Europe providers (inserted general europe voice,
obiously i can't add a provider for each one on the worl, so just update the file if you need a specific provider)
- fixed some other channels scan bugs
- fixed menu Network test on the "link connection" voice
- fixed positioner menu crashes
- MediaPlayer Bug with a gsod on NoneType error using subtitles
- fixed rotor using diseqc
- reboot of enigma2 now should works good
- completed the kernel version p0041 adaption
- improved a bit CI cams manager
- fixed many memory bugs that caused the player to crash (let me know if you find more bugs on playing multimedia files)
- ipkg support, as soon as sifteam will have a download for ipk files you will be able to download them from the browse plugin menu
- added by default the file /var/etc/rcS_user.sh that is called on boot, so if you want to add any kind of command to be executed on start
just put them in this file
- patch for North American satellites (let me know if you find any kind of bugs)
ATTENTION:
if you are a NA user, do not forget to change in the "/etc/init.d/rcS" file this value:
insmod $MODDIR/stmfb.ko display0=1280x720-32@50:12M:PAL:YUV:RGB;
into:
insmod $MODDIR/stmfb.ko display0=1280x720-32@60:12M:NTSC:YUV:RGB;
This is needed to let you see the boot image and to have a full working display on TV.
Ok that's all, i know there are some other bugs to be fixed, but i think there were a lot of improvement in this version and
i'm working to some new drivers so i think before using the new drivers we should test all these improvements and then see if something could be better or not.
İPBOX 9000 HD E2
tüm modeller için flash ve usb versiyonları buradan alabilirsiniz
auto ıp alıyor
HD skins çalışıyor
restart gui düzelmiş
ses/görüntü ayarlarından just scale seçip hafızaya alırsanız kanal değişince 16/9 olarak geliyor
incubusCamd 082 ile muntazam bir şekilde uyumlu çalışıyor
image için SifTeame PKT panel için PKT teşekkürler
E2 0.4.1 e uyumlu PKT paneli ekledim
Yorum